Line Dual

See More About:    Zenith Carburetor        Fertilizer Attachment        Aftermarket Case        

This is a product assessment for Line Dual. Many shoppers don"t straightaway think of eBay when it comes to Line Dual, but in fact eBay is amongst the top three retailers in the nations marketplace. Be amazed with the items you will discover here at Commercial Agriculture.


DMP 893A DUAL PHONE LINE MODULE
dmp 893a dual phone line module
$35.00
quality
328 Foot Spool 5 16 79mm Black Adhesive Lined Dual Wall Heat Shrink 31 Ratio
328 foot spool 5 16 79mm black adhesive lined dual wall heat shrink 31 ratio
$149.99
quality
C Line Stitched Dual Pocket Shop Ticket Holder with Hanging Strap Both Sides
c line stitched dual pocket shop ticket holder with hanging strap both sides
$28.66
quality
328 Foot Spool quarter  64mm Black Adhesive Lined Dual Wall Heat Shrink 31 Ratio
328 foot spool quarter 64mm black adhesive lined dual wall heat shrink 31 ratio
$134.99
quality
328 Foot Spool 3 16 48mm Black Adhesive Lined Dual Wall Heat Shrink 31 Ratio
328 foot spool 3 16 48mm black adhesive lined dual wall heat shrink 31 ratio
$119.99
quality
656 Foot Spool 1 8 32mm Black Adhesive Lined Dual Wall Heat Shrink 31 Ratio
656 foot spool 1 8 32mm black adhesive lined dual wall heat shrink 31 ratio
$169.99
quality
Binocular Stereo Microscope20X 80X+6W LED Dual Gooseneck Light Assembly Lines
binocular stereo microscope20x 80x+6w led dual gooseneck light assembly lines
$341.99
quality
GANNOMAT PROLINE 50 DUAL HEAD LINE BORING MACHINE
gannomat proline 50 dual head line boring machine
$5,250.00
quality
DETECTION SYSTEM  DUAL PHONE LINE NOTIFIER DS742OiAT  NEW 0914
detection system dual phone line notifier ds742oiat new 0914
$30.00
quality
NIB Fire Lite Alarms Honeywell 411UD 4 Channel Dual Line Dialer
nib fire lite alarms honeywell 411ud 4 channel dual line dialer
$200.00
quality
ISDN Simulator Line Simulator Virtual Console Made U S T Dual RS 232
isdn simulator line simulator virtual console made u s t dual rs 232
$225.00
quality
FLEMING GAS POWERD DUAL REEL CABLE SPOOL LINE TRAILER IN EXCELLENT CONDITION
fleming gas powerd dual reel cable spool line trailer in excellent condition
$3,500.00
quality
25 PCS INTERFACE IC SN75123N DUAL LINE DRIVERS 16 DIP 16 PIN PDIP SN75123N 75123
25 pcs interface ic sn75123n dual line drivers 16 dip 16 pin pdip sn75123n 75123
$29.88
quality
75 PCS INTERFACE IC SN75112D IC DUAL LINE DRIVER 14 SOIC 14 PIN SOIC TI 75112
75 pcs interface ic sn75112d ic dual line driver 14 soic 14 pin soic ti 75112
$25.45
quality
Bosch Radionics Dual Phone Line Switcher D928
bosch radionics dual phone line switcher d928
$20.00
quality
Lucksender 53Pcs Dual Wall 31 Adhesive Lined Heat Shrink Tubing Sleeving
lucksender 53pcs dual wall 31 adhesive lined heat shrink tubing sleeving
$21.99
quality
Hp ap5000 POS 28 GHz Dual Core 64GB SSD 3GB 2 Line VFD Display
hp ap5000 pos 28 ghz dual core 64gb ssd 3gb 2 line vfd display
$169.95
quality
Soler and Palau KIT TD150 DV TD 150 Dual Vent In Line Fan Kit
soler and palau kit td150 dv td 150 dual vent in line fan kit
$257.93
quality
Line Drivers Dual Bidirectional Bus Buffer Texas Instruments P82B96DGKR 100pcs
line drivers dual bidirectional bus buffer texas instruments p82b96dgkr 100pcs
$200.00
quality
Sewing Machine Hand Machine Cobbler Shoe Repair Machine Nylon Line New Dual Z
sewing machine hand machine cobbler shoe repair machine nylon line new dual z
$207.78
quality
Ritter R 46 Dual Line Boring Machine Woodworking Machinery
ritter r 46 dual line boring machine woodworking machinery
$5,995.00
quality
15 Polyolefin 31 Adhesive Lined Dual Wall Heat Shrink 381mm Red 4ft  2 S
15 polyolefin 31 adhesive lined dual wall heat shrink 381mm red 4ft 2 s
$108.42
quality
Sewing Machine Nylon Line Cobbler Shoe Repair Machine New Dual Cotton Hand V
sewing machine nylon line cobbler shoe repair machine new dual cotton hand v
$209.89
quality
34970 Air Conditioning Line Repair Tools Dual Inlet Air Vac For R 12 AND R 134A
34970 air conditioning line repair tools dual inlet air vac for r 12 and r 134a
$94.99
quality
DSC Digital Security Controls dual Line Dialer PC4701 70000427
dsc digital security controls dual line dialer pc4701 70000427
$24.95
quality
Monarch Paxar 1136 Dual Line Label Gun Pre Owned Works Great with instructions
monarch paxar 1136 dual line label gun pre owned works great with instructions
$39.99
quality
31 Heat Shrink Adhesive Lined Dual Wall Clear 100F  Pre Shrink Size quarter
31 heat shrink adhesive lined dual wall clear 100f pre shrink size quarter
$35.18
quality
New FARVAL DD54 250 Dual Line Manifold Distribution Valve
new farval dd54 250 dual line manifold distribution valve
$29.95
quality

Didn"t find what your looking for? Search our real time inventory below...

Line Dual

See More About:    Bandsaw Wheels        Hog Mower        Link Cat        
Pro-Line 2 tablet PC (dual core)

Liquid temperature-control equipment.

ADVANTAGE ENGINEERING,
INC

.

Leading manufacturer of fluid-circulating heat transfer equipment
for molding, extrusion, thermoforming and other plastic processes. Both
energy efficient portable chillers and plantwide central systems are
available.

Portable chillers from 1- to 30-ton capacity in air- and
water-condensed designs. Central chillers from 10 to 500 tons in air-
and water-condensed outdoor and indoor systems.

Water- and oil-circulating mold-temperature controllers. Water
units operate between 30[degrees]F and 250[degrees]F. Oil units operate
between 100[degrees]F and 500[degrees]F.

Cooling-tower systems from 20- to 1,000-ton capacity. Metal and
fiberglass tower cells. Open- and closed-loop designs standard.
Engineering services included with central cooling systems. Equipment
can be computer-connected for remote control, information collection,
and data storage.

Closed loop cooling systems with adiabatic pre-cooling are offered
in capacities from 25-500 tons. These systems provide water and energy
savings while keeping your process water
contaminant
 /con·tam·i·nant/ () something that causes contamination.



contaminant

something that causes contamination.
 free.

AEC
 US Atomic Energy Commission

Noun 1. AEC - a former executive agency (from 1946 to 1974) that was responsible for research into atomic energy and its peacetime uses in the United States
Atomic Energy Commission
, INC.

TrueTemp water temperature-control units with 0.75- to 10-hp pumps
and standard stainless-steel sheath heater selection from 9 to 24 kw.
Off-the-shelf microprocessor control with easy-to-read LED, dual display
of setpoint and process temperature, optional
SPI

 communication
protocol, and full-feature graphic display panel. Low-profile cabinet
designed for stacking and easy maintenance. Standard options include
VacuFlow negative/positive pressure units, system water purge,
modulating cooling valve, and closed-loop
heat exchanger

.

GP Series Portable air- and water-cooled chillers range from 5 to
60 tons, are compact and offer
environmentally friendly

 R-410a

refrigerant

adj.
1. Cooling or freezing; refrigerating.

2. Reducing fever.

n.
1. A substance, such as air, ammonia, water, or carbon dioxide, used to provide cooling either as the working substance of
.

New GC series central chillers modules offer 70-210 kW (20-60 tons)
of
refrigeration
 process for drawing heat from substances to lower their temperature, often for purposes of preservation. Refrigeration in its modern, portable form also depends on insulating materials that are thin yet effective.
; available in either water or remote air-cooled models,
you can assemble these modules to provide over 1,000 kW (300 tons) on
your time. The new GC Central Chiller has convenient modular
capabilities that grow as your business grows.

BFC

BFC Betty Ford Center
BFC British Fashion Council
BFC Bicycle Friendly Community
BFC Bible Fellowship Church
BFC Boavista Futebol Clube
 series air coolers provide air-ring cooling at constant
temperature, pressure and volume. Available up to 5,000 cfm.
Cooling-tower systems for condenser and
molding machine

 hydraulics come
in Polymer Tower forced-draft and fiberglass induced-draft models from
50 to 200 tons.

BIBBY SCIENTIFIC US (TECHNE INC.)

Circulating bath systems for open and closed applications for
above-ambient temperatures to a maximum of 250[degrees]C. Five bath
capacities from 8 to 48 liters and five temperature-controlled
circulators make up the 25 available systems. Each can be used as an
open bath to provide maximum working area or as a closed circulating
system for external apparatus.

Inlet and outlet pipes at the rear ot the circulator can be used
for external circulation or terminated for circulation only within the
bath itself. Although designed primarily for heating applications, the
baths are calibrated at temperatures below ambient and can be used at
sub-ambient temperatures.

CIMCO

 REFRIGERATION DIV. OF TORONTO INDUSTRIES
LTD
 1 Laron-type dwarfism 2 Leukotriene D 3 Long-term depression, see there 4. Long-term disability
.

Supplies custom chillers, cooling-tower systems, pump-tank systems,
shell-and-tube heat exchangers, and condensers.

COLORTRONIC
NORTH AMERICA
 third largest continent (1990 est. pop. 365,000,000), c.9,400,000 sq mi (24,346,000 sq km), the northern of the two continents of the Western Hemisphere.
, INC. Company offers a full line of
process heating and cooling equipment from water and oil
temperature-control units to custom designed chilled- and tower-water
systems.

COMET PLASTIC EQUIPMENT
LLC

 Company offers its liquid circulating
temperature-control products: CW series hot-water temperature
controllers (up to 356[degrees]F), CO series hot-oil units (to
356[degrees]F),
CWO

abbr.
1. cash with order

2. chief warrant officer
 series water or oil units (194[degrees]F with water,
302[degrees]F with oil), and CV series water or oil units (194[degrees]F
with water, 302[degrees]F with oil) that operate in pressure or suction
(leak-stop) mode. All have corrosion-free bronze pumps made by Speck in
Germany.

CONAIR

EarthSmart
ECA

 series air-cooled chillers and
ECW

ECW Extracellular Water
 series
water-cooled chillers are portable, packaged, units built for stable
temperature control in machine-side applications. Designed to use
environmentally friendly R-410A refrigerant, there are air- and
water-cooled models available in multiple 3-phase voltages in sizes from
1.5 to 30 tons. Also available with R-134A refrigerant and single-phase
power are 1/2- and 3/4-ton air-cooled models. Standard features include
fin-and-tube condensers with vertical air discharge on air-cooled units;
brazed-plate condensers on larger water-cooled chillers and tube-in-tube
on smaller water-cooled units; brazed-plate evaporators; and scroll
compressors on all 3-phase models. A basic microprocessor-based control
with LED display of setpoint and actual temperatures plus component
status and diagnostics is standard. Options include communications with
molding machines or
supervisory control

 packages like the Conair
ControlWorks platform. Central water systems include outdoor air-cooled
chillers in 20- to 527-ton capacities and single-, dual-, and
multiple-compressor designs, as well as indoor water-cooled chillers
from 50 to 481 tons. Pump-tank assemblies with optional high-end
PLC/touch panel controls include 180- to 1,100-gal (681 L to 4,164 L)
roto-molded PE tanks or epoxy-lined mild steel or stainless-steel
reservoirs from 1,525 to 5,010 gal (5,773 L to 18,965 L) and larger
custom designs as required. Pumps from 2 to 100 hp (1.5 to 75 kW) and
larger if required.

Induced-draft, counter-flow cooling towers are available in four
different size ranges, with capacities from 10 to 810 tons and larger.
Bodies are molded from polyethylene and are warranted for 15 years
against rust, chips or cracks. Fans and other internal components are
corrosion-resistant, so they provide years of low-maintenance service.
Options include variable frequency fan drives to closely control
temperature and save energy.

For standard press-side temperature control, the economical
Thermolator water-temperature controllers feature two-piece castings
that eliminate up to 40 leak-prone fittings. Units available in single-
or dual-zone configurations for direct injection, closed- or
isolated-circuit process heating and control of cooling. Pumps to 7.5 hp
(56 kW), heaters to 48 kW, and process temperatures to 250[degrees]F
(119[degrees]C). Microprocessor controls include low-cost TW controls,
which combine the functionality of temperature-indicating controls (TIC)
with many user-friendly features of
programmable logic

 controllers (PLC)
normally only available on more expensive units. All units covered by
three-year warranty. A corrosion-resistant package option is available
to minimize or eliminate rust from process water.

To reduce cycle times and improve part quality and surface finish
in appearance-critical molded parts, the TW-ALT alternating-temperature
controller cycles hot and cold water through mold heating and cooling
channels. Four different models are available, ranging from maximum flow
rates of 16 gal/ min (60 1/min) to 230 gal/min (870 I/min). Water as hot
as 39[degrees]F (200[degrees]C) can be supplied, with cooling water
supplied at 59[degrees]F (15[degrees]C). Alternating temperatures can
cycle through a swing of 180[degrees]F (100[degrees]C).

Providing a safer and more environmentally friendly alternative to
circulating-oil TCUs, new TW-HT Series mold-temperature-control units,
which can deliver circulating water at up to 392[degrees]F
(200[degrees]C). Compared to oil heat-transfer media, superheated water
offers higher specific-heat capacity, better thermal conductivity and a
heat-transfer coefficient that is more than double. For medical
applications involving PEEK, polyetherimide (Ultem) and other
ultra-high-temperature materials, which may require mold temperatures as
high as 437[degrees]F (225[degrees]C), a special TW-HTM model is
available. Five different TW-HT models are available, with maximum flow
rates between 16 gal/min (601/min) and 245 gal/min (9301/min). The
ultra-high-temperature TW-HTW unit is available in a 7-gal/min (25 Umin)
configuration.

HeaTrac oil temperature-control units with pumps from 1 to 3 hp for
mold temperatures to 500[degrees]F (260[degrees]C). VacuTrac
positive/negative pressure units with pumps from 2 to 7.5 hp.

DELTA T SYSTEMS INC.

Water-circulating temperature-control systems feature horizontal
pumps that extend seal life and copper sheath heater element that
maximizes heat transfer. Units come in single- or multiple-zone
configurations operating to 300[degrees]F and conforming to NEMA-1
specifications. Custom designs available.

KB upright series comes with standard 9-kw
heating element

; fully
programmable, micro-processor-based
PID

 digital controller; and pumping
capacities from 0.75 to 5 hp. SB series with 4.5- and 9-kw heaters and
V2-hp motors are suitable for smaller molding machines.

Oil-circulating systems operate to either 400[degrees]F or
550[degrees]F Units offer low-watt-density, steel sheath heater
elements; long-lasting,
positive displacement

, mechanical seal pumps;
and fully programmable, microprocessor-based PID digital controller.
Heater sizes from 6 kw and up, pumping capacities from 10 gpm and up,
and single- and dual-zone configurations.

EUROTHERM INC.

Full line of controllers for mold and
auxiliary equipment

 cooling.
New 3216 single-loop liquid-temperature controller is 90 mm deep and has
a text display for easy configuration, high accuracy input, five
on-board process recipes with 48 parameters/recipe, and company's
patented Instant Accuracy system. Ordering, configuration, and
maintenance have been simplified to a code that completely specifies the
functionality and configuration.

Features of the 3216 include universal input, universal power
supply, the ability to download custom input curves,
digital
communications

, IP65 rating and the availability of a
current
transformer

 input for monitoring load current. New version of
company's iTools small graphical configuration software allows
controller to be configured without connecting it to a power source.

EVAPCO CANADA

Cooling towers or complete installation of chilled water-cooling
systems.

Specializes in cooling tower replacements and rebuilding, pumping
stations, and chilled water-storage tanks. Parts and service for all
makes of cooling towers and pumps. Services include preventative
maintenance programs.

FIRST CHOICE PORTABLE CHILLERS INC.

Manufactures air- and water-cooled portable chillers, plantwide
remote condenser air- and water-cooled chillers with pump systems with
standby pumps. Also modular chillers for plantwide cooling, which enable
easy expansion without shutting down the existing system. Also offers an
air-cooled chiller for a single film line and air cooling coil units for
use with plantwide chilling systems for multiple film lines.

Supplies cooling-tower systems complete with cooling towers,
pumptank systems with standby pumps, automatic chemical treatment
packages with filtration systems for inline and bypass filtration with
manual and automatic purge systems.

FOREMOST MACHINE BUILDERS, INC.

Air- and water-cooled portable chillers, indoor and outdoor air-
and water-cooled central chillers, cooling towers and chemical treatment
packages, pump-tank sets with options for standby pumps, discharge
headers, filter systems, and central control and alarm panels.

FRIGEL NORTH AMERICA, INC.

New branch of Italian firm supplies Microgel water-cooled portable
chillers with built-in heating capability (6 to 48 kw) for a temperature
range of 200 to 195[degrees]F Automatic "free-cooling" when
neither heating nor chilling is required to modify incoming
process-water temperature. Automatic mold draining with vacuum.

Also supplies Thermogel pressurized hot-water temperature-control
units for up to 350[degrees]F. Special control algorithm and motorized
modulating valve (instead of on/off
solenoid
 , device made of a long wire that has been wound many times into a tightly packed coil; it has the shape of a long cylinder.
) reportedly allows faster
heat-up.

Also supplies Ecodry system for central cooling without a cooling
tower or central chiller. Uses "free cooling" with special
adiabatic mode for high ambient temperatures and automatic bypass in
cold weather.

GREEN BOX AMERICA, INC.

Fluid Coolers to replace cooling towers for benefit of plant and
planet. Technology provides clean water and in closed-loop to your
industrial processes, all year long.

The latest generation of Green Box Fluid Coolers are designed with
iC3 Technology, and provide benefits beyond other manufacturers. The
Fluid Coolers operate as an air-to-water heat exchanger, a very
economical and reliable means of cooling your process water. Several
fans, variable speed or staged, match your required cooling needs. The
process heat load dictates the rpm of the fluid cooler fans.

During the hottest hours of the summer, Adiabatic Cooling increases
the
relative humidity

n.
The ratio of the amount of water vapor in the air at a specific temperature to the maximum amount that the air could hold at that temperature, expressed as a percentage.
 of the ambient air. This is achieved by nozzles
spraying a fine mist of tap water into the air, on both sides of the
fluid cooler. This effect decreases the air temperature before entering
the heat exchanger. Hence, the leaving water temperature to your process
is below the ambient temperature.

The Adiabatic-SSS Option (Super Spray System) increases the
Adiabatic efficiency by using nebulizers.

H20 ENGINEERED WATER SYSTEMS

Company provides mold-temperature controllers, chillers, cooling
towers and filtration systems that improve productivity through reliable
and energy-efficient performance.

HAMILTON PLASTIC SYSTEMS LIMITED

Direct- or indirect-cooling liquid-temperature controllers in pump
sizes from J/2 to 3 hp and 3-12 kw heating, and solid-state or
microprocessor controls.

The 2000 series portable air- or water-cooled chillers from 2 to 35
tons include NEMA-rated components, solid-state temperature controllers,
semi-hermetic compressors, and hot-gas bypass.

Also process-water systems, including central chillers, pump tanks,
and cooling towers. Heat-recovery systems recycle process heat and use
it to supplement plant heat during winter.

IMS

 INDUSTRIAL MOLDING SUPPLIES A DIVISION OF IMS COMPANY

Various styles of mold temperature controllers are available. A
positive/negative pressure circulator can stop line leaks. Air-cooled
TrueMold controllers are totally self-contained. A pressurized,
open-loop unit provides fast, accurate temperature control. The IMS
Temkon SS is perfect for mold preheating and small molds and our
oil-heating circulators have maximum use temperatures of 550[degrees]F.
MicroMax, TrueTon and MC Series air-cooled chillers in I/3 to 20 tons
require minimal maintenance and are self-contained. Other sizes and
water-cooled units made-to-order.

LOGIC CORP., THE

Negative-pressure leak
stoppers

 and negative/positive-pressure
mold-temperature controllers for up to 400[degrees]E Vac-U-Temp is a
general-purpose temperature controller with negative- and
positive-pressure modes usable simultaneously. In addition to
controlling temperatures, it stops leaks, improves part quality, and
reduces cycle times. Uses water and other heat-transfer fluids.

L-R SYSTEMS

Supplies central and portable chillers (both air- and water-cooled)
as well as oil- and hot-water temperature controllers, negative-pressure
units, cooling towers, pump-tank stations, heat exchangers, water
filters, and water-treatment systems.

Line of cooling products (built by another U.S. supplier) includes
portable air-cooled chillers of 0.25 to 30 tons and water-cooled units
of 2 to 40 tons. Units have centrifugal pumps (0.24 to 10 hp), scroll or
reciprocating compressors, brazed-plate evaporators, nonferrous
reservoirs, stainless-steel cabinets, and microprocessor controls with
SPI communications protocol.

Also available are pump tanks from 250 to 5,000 gal. with pumps of
2 to 60 hp and cooling towers of 45 to 450 tons with nonferrous
constructions, single or multiple cells.

Firm offers hot-water units of 0.75 to 7.5 hp and 6 to 48 kw for
temperatures up to 250[degrees]F. Units have modulating cooling valves,
stainless-steel cabinets, continuous display of setpoint and process
temperatures, and SPI communications protocol. Hot-oil systems heat up
to 500[degrees]F with 12 to 48 kW and have centrifugal pumps of 1 to 7.5
hp, stainless-steel cabinets, and low-watt-density heaters.

MATSUI AMERICA, INC.

MC series temperature controllers provide precise temperature
control through PID microprocessor control. Made of
stainless steel
 see steel.


stainless steel

Any of a family of alloy steels usually containing 10–30% chromium. The presence of chromium, together with low carbon content, gives remarkable resistance to corrosion and heat.
 and
nonferrous components for durability. Using a floatless switch system,
MC seals itself off from pressure and temperature fluctuations in the
water supply system. Heater element is sheathed and plated to resist
scaling and other harmful deposits.

Compact MC units require little floor space and are highly energy
efficient. Available with 0.4-, 0.8- and 1.3-hp pumps and 3- to 8-kw
heaters in water or oil.

Standard equipment includes alarm diagnostics, casters, manifolds,
stainless ball valves, outlet pressure gage with pressure bypass valve
and solid-state relays.

MOKON

Circulating water and heat-transfer oil temperature control
systems, portable and central chillers, pump tanks, cooling towers,
blown film coolers, cold climate coolers, engineered and pre-engineered
control panels, maintenance products, and custom designed/engineered
systems.

Circulating water temperature-control systems with a temperature
range up to 300[degrees]F (149[degrees]C). Mokon miniTHERM compact
circulating water system for small-tonnage machines and laboratory
applications available in 2 or 4 kw. Hydrotherm II compact and portable
circulating water system is equipped with stainless-steel construction
for wetted surfaces with systems up to 24 kW heating capacity and up to
60 gpm. Mokon Duratherm circulating water systems feature noncorrosive
construction, copper piping and heaters, stainless-steel pump, and
horizontal brass heating chamber. Available from 9 to 96 kw heating, and
25 to 120 gpm pumping. Systems available in single- and dual-zone
configurations and
HTP

HTP Hack the Planet
HTP Hannovers Telefon Partner GmbH  
 designs (higher temperatures to 300[degrees]F
(149[degrees]C) and pressure to 70 psi). Duratherm
NPS

NPS Non-Point Source pollution
NPS Native Plant Society
NPS Norfolk Public Schools  
 gives accurate
temperature control in either a positive or negative pressure mode.

Circulating heat-transfer oil temperature-control systems with a
temperature range up to 650[degrees]F (343[degrees]C) incorporate a cool
oil reservoir that eliminates thermal shock associated with in-line

shell and tube heat exchanger

. Up to three zones of control in the same
cabinet and pumping capacities to 120 gpm and 100 psi. Air- and
water-cooled portable chillers with cooling capacities from 0.25 to 40
tons. Corrosion-free construction with nonferrous plumbing,
stainless-steel supply pump and evaporator, and heavy-duty insulated
plastic tank. Combination heating/chilling unit provides temperature
control from -10[degrees]F to 300[degrees]F (-23[degrees]C to
149[degrees]C) with up to 40 tons of chilling capacity. Dual circuit
capacity chillers are also available from 10 to 40 tons.

Central chiller systems available in air- or water-cooled designs,
in single- or multiple-circuit configurations, and with capacities from
30 to 120 tons. Also available are outdoor chillers from 1 to 500 tons
and pump tanks constructed of stainless steel in a variety of sizes with
pumping configurations to meet processing demands. Two types of cooling
towers are available constructed of rugged galvanized steel or
state-of-the-art
HDPE

abbr.
high-density polyethylene
 from 10 tons of cooling capacity and up. Cold
climate cooler systems are available* offering a cost effective solution
to process cooling in cold weather areas up to 130 tons. Blown film air
coolers offer an increase in blown film productivity in sizes from 600
to 9,000 CFM, Power and process control systems for commercial and
industrial applications are also available.

Maintenance products include Leakmaster negative-pressure systems
that eliminate processing problems associated with leaks; D-Scaler
systems, which remove rust, scale and/or lime deposits; and ClearFlo
heat-transfer fluid and water-filtration systems, which improve
efficiency of heat transfer system and reduce downtime and maintenance
labor.

NISSEI AMERICA, INC.

NI-LW series of hot-water temperature controllers has four models
that pump at 16 to 39.6 gal./min. and pressures from 58 to 94 psi,
depending on model. Units operate at up to 248[degrees]F and feature PID
control, solid-state relays, direct-cooling circuit design, and
simplified control panels.

PLASTIC PROCESS EQUIPMENT, INC.

Improved mold fluid-temperature controller heats to 250[degrees]F
with touch-panel keyboard and digital readout for easier settings and a
more accurate temperature control of [+ or -] 1[degrees]F. Designed for
continuous use. 0PC SYSTEMS, LLC Produces hot-water and oil-circulating
mold-temperature controllers, negative-pressure systems.

RITE-TEMP
MFG

MfG Mitfahrgelegenheit
MFG Marithe Francois Girbaud  
. INC.

Refrigerated water chillers in four designs of 2 to 36 tons. Air-
and water-cooled units have standard 40-gal. stainless-steel, closed
evaporator tank. Also portable units, indicating gages, indoor or
outdoor installation, and user-friendly controls.

SHIN USA

A wide range of chilling and temperature control equipment that
meets your processing needs with everything in stock and ready to ship.
Whether you need a Portable Chiller, Mold Temperature Controller or a
Portable Hot Oil Unit, let Shini USA recommend the temperature control
equipment for your Injection Molding or Blow Molding process.

Offers high quality portable liquid chillers designed to supply
temperatures between 20[degrees] to 65[degrees] F for process
applications. With sizes ranging from 3 to 30 tons, Shini USA has a
large selction of portable chillers, air-cooled chillers and
water-cooled chillers available. The Shini USA Industrial Liquid
Portable Chillers for Process Cooling feature Scroll Compressors,
Nonferrous piping and Full Diagnostics. The Air-cooled Portable Chillers
and the Water-cooled Portable Chillers are intended for indoor use only.

Industrial Temperature Control Modules, utilized primarily in the
injection molding, extrusion, and die-casting industries are off the
shelf, built for top performance and are ideally suited for all plant
environments and industrial processes.

Mold Temperature Controllers are designed to circulate a fluid
medium (typically water,
glycol
 , dihydric alcohol in which the two hydroxyl groups are bonded to different carbon atoms; the general formula for a glycol is (CH2)n(OH)2.
, process fluids) for conti-nous process
temperature control between 32[degrees] to 250[degrees]F.

Thermolators feature heating and cooling via direct injection for
cooling. A 1/2" cooling solenoid valve will maintain temperature
set point within [+ or -]2[degrees]F. The Mold Temperature Control Units
are caster mounted for portability throughout your entire plant.

Offers two separate Industrial Portable Hot Oil Units.

A High Temperature Portable Hot Oil Unit suitable for temperatures
up to 550[degrees]F featuring a "Mag-Drive" Seal-less Pump,
which saves on seal changes and maintenance down time.

The 400[degrees]F Portable Hot Oil Unit is used for applications
not requiring high temperatures and features Omron PID Controller.

SINGLE TEMPERATURE CONTROLS, INC.

Supplies air- and water-cooled chillers, both portable and central
types, with cooling capacities from 1-58 kW and pump capacity of 27-400
liters/min. Water-cooled models are closed-loop, which prevents
contamination of circulating water.

Also available are water heating/cooling systems with
closed-circuit water cooling, air- or water-cooled condenser,
temperature range of 500 to 194[degrees]F, and pump capacity of 60 to
400 liter/min. Pressurized hot-water units offer temperatures up to
400[degrees]F, said to be superior in cost and safety to using hot oil.

Also offers hot-oil units for up to 662[degrees]F with heating
capacity of 3 to 144 kW and pump capacity of 45 to 1,080 liters/min.
Some models have magnetically engaged pumps.

STAR AUTOMATION INC.

Company offers SK A-II line of compact mold-temperature controllers
with built-in air-cooled chiller for temperatures from 40 to
200[degrees]E Also STV/ portable mold-temperature controllers for up to
248[degrees]F in models from 3 to 9 kW. Both lines circulate
non-corrosive, non-rusting Star Brine
SII

SII Seiko Instruments, Inc.
SII Strong Interest Inventory
SII Standards Institution of Israel
SII Securities and Investment Institute  
 
coolant
,
n
. STW line has indirect
water cooling via heat exchanger. Also supplies standalone chillers.

STERLING

Water- and oil-circulating temperature-control systems for standard
and high-temperature applications to 650[degrees]E Portable and central
chilling systems from 5 to 200 tons. Chillers have compressor and
control technology to match application. Cooling towers, water reservoir
and pumping systems, water filtration and treatment equipment available.
Line of compact temperature control units with 9- and 12-kW heaters and
pumps from 0.75 to 5 hp. Many models feature simplified internal cast or
nonferrous fluid circuit with 40% fewer connections and 80% fewer
mechanical parts than conventional designs. Simplified design provides
balanced flow with lower pressure drop. Most of the company's
temperature control units feature the
M2B
 
+ microprocessor control. Units
also feature
NEMA
 
 12 electrics and meet new
NEC

 electrical standards.

Water-temperature control units provide water supply temperature to
300[degrees]F. Heaters available in sizes to 48 kW; pumps from 0.75 to
7.5 hp. Single-, dual- and three-zone units can be supplied with common
power and water supply connections. Nonferrous construction and a
variety of control and computer-interface options available.

Air- and water-cooled portable chillers from 0.5 to 30 hp supply
chilled water from 0[degrees]F to 70[degrees]F in a variety of flow
rates and pressures, using single and dual pumps. PID autotuned
microprocessor controls ensure accuracy to [+ or -]1[degrees]E Many
models feature scroll compressors for lower operating costs.

Air- and water-cooled central chilling systems available along with
comprehensive systems design and installation services. Units feature
capacity staging and unloading. A central chilling station includes
tank, refrigeration, control system and pumping system in a small
footprint with lower installation costs.

Metal cooling towers from 10 to 632 tons and fiberglass units from
50 to 200 tons.

TEMPTEK, INC.

Mold-temperature controllers, portable chillers, pump-tank
stations, and cooling-tower cells designed for mechanical simplicity and
operator convenience, utilizing ultra-rugged construction and fewer
components.

Temperature controllers available in water and hot-oil, open- and
closed-loop configurations. Water units control to 250[degrees]F,
oil-circulating units to 400[degrees]F. Space-efficient units have
high-flow pumps, flanged heaters, and advanced electronic
instrumentation with remote capabilities.

Portable chillers and chilling modules available in air- and
water-condensed versions. Units from 1 to 30 tons with operating
temperatures from 30[degrees] to 70[degrees]E Chilling modules from 5 to
40 tons with operating temperatures from 20[degrees] to 60[degrees]F.

Pump-tank stations utilize minimum floor space while emphasizing
vertical dimension for water storage. Standard process connections for
pumps, sensors, drains, and water-level controls simplify installation.

Cooling towers in galvanized metal or fiberglass from 10 to 540
tons employ energy-efficient prop fans, generous wet decks, and large
water reservoir.

THERMAL CARE, INC.

Portable chillers in air-cooled, water-cooled or remote condenser
units from one to 60 tons have accessible cabinet design, nonferrous
water system, and microprocessor controls with lifetime warranty. A PLC
controller is optional.

Central chillers in three configurations: TS series economical
plantwide systems from 20 to 100 tons with scroll compressors and two
independent refrigeration circuits. MX series single- and dual-circuit
units with screw compressors from SO to 500 tons; and TC series single-
and dual-circuit units with advanced technology centrifugal compressors
from 60 to 540 tons. TC models have novel frictionless, magnetic
bearings that give unusually quiet, energy-saving performance.

All central chillers come standard with a PLC touchscreen and
remote diagnostic capability. Fiberglass cooling towers from 38 to 240
tons. Units have a high-efficiency induced-draft design and strong,
lightweight, noncorrosive
FRP

FRP Fiberglass-Reinforced Plastic
FRP Fiber Reinforced Polymer
FRP Fibre Reinforced Polymer
FRP Fleet Response Plan  
 shell.

Nonferrous construction and five-year total tower warranty
(including motor) and 10-year shell warranty.

Pump/reservoir assemblies custom engineered in any size and
configuration for tower or chiller applications. Available in
fiberglass, stainless-steel, or steel construction with solid pump decks
and mounted, prewired control panels and touch screen PLCs.

Temperature-control units in a complete range of pumping, heating,
and cooling configurations for oil and water from 0.75 to 10 hp, 9 to 60
kW. Unitized cast construction of twin tank and pump assembly and
microprocessor with five-year warranty. Lifetime seal and casting
warranty. Negative pressure units available.

THERMO

 SCIENTIFIC

Circulator line consists of a full line of Haake and Neslab bath
circulators, recirculating chillers, heat exchangers, immersion coolers,
and cryostats covering temperatures from -90[degrees]C to 300[degrees]C.

WITTMANN BATTENFELD, INC.

Full line of hot-water temperature controllers: Tempro Basic,
Direct and Plus models up to 320[degrees]F and oil units to
500[degrees]F Plus units available in single- or dual-zones and as
either an open system with
submersible
 small, mobile undersea research vessel capable of functioning in the ocean depths. Development of a great variety of submersibles during the later 1950s and 1960s came about as a result of improved technology and in response to a demonstrated need for
 pumps and no pump seals (no seal
maintenance) or as a pressurized system with magnetically coupled pumps
without pump seals. Tempro Plus C units offer a full-featured
customizable color LCD display. Other standard features include
automatic pump phasing, digital pressure reading, and solid-state relays
with optional ultrasonic flow measuring and machine interface.
High-pressure regenerative turbine pumps provide up to 100 psi. Complete
range of operating temperatures from 200[degrees]F to 360[degrees]F
Single-circuit Tempro Basic units operate up to 200[degrees]F,
285[degrees]F or 300[degrees]F, depending on model.

All units have 100% non-ferrous contact surfaces and include a
power cord, Y strainer, and main power switch. Mold purge and negative
pressure (leakstop) are also standard on most units.

If you are looking for a different item here"s a list of related products on Commercial Agriculture, please check out the following:

See More About:    Wheel Cap        Tractor Sales        Fleetguard Air        

Other Items People View After These Listings About